Full Length Centre Console (76 Wagon & 79 Dual Cab)
FULL LENGTH CENTRE CONSOLE
Made to suit VDJ Plastic Dash 79 Dual Cabs, and Both Old Steel Dash and Plastic Dash 76 Wagons - INCLUDING THE NEW FACELIFT MODELS (This Console is model specific and not interchangeable – It DOES NOT FIT in any other models) Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid) Features: - Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available) - Padded Lid at armrest height with a large carpeted compartment underneath - A Removable Plastic Tray underneath the Lid - Black Plastic Cup Holders - 4x Carling Switch Provisions with Blanks - in front of the gearstick - Only uses Factory mounts for Installation (No drilling into the Cab required) - Optional Extras (Product Addons Section Below): * Stainless Steel Cup Holders (additional cost - $30.00) * Rear Sockets (2x USB-A Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00) * Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00) * Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00) * Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00) * Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00) * Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00) * Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
Select options
This product has multiple variants. The options may be chosen on the product page
Full Length Centre Console (78 Troop Carrier)
Full Length Centre Console
Made to suit 78 Troop Carriers (Exact Models Listed Below) - INCLUDING THE NEW FACELIFT MODELS (This Console is model specific and not interchangeable – It DOES NOT FIT in any other models) Please note you will loose full movement of your passenger seat being able to go all of the way forward, as the seat hits on the gearstick surround section of the console. PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING: • 2002 – 2007 HDJ78 Old Steel Dash RV with Toyota Factory Bucket Seats If you have the above year model but in a Workmate Converted to Bucket Seats PLEASE CALL before ordering • 2007 – 2009 VDJ78 Old Steel Dash GXL with Toyota Factory Bucket Seats If you have the above year model but in a Workmate Converted to Bucket Seats PLEASE CALL before ordering • 2009 – Current VDJ78 Plastic Dash GXL or Workmate (2014 onwards) with Toyota Factory Bucket Seats If you have the above model but it’s a Pre-2014 Workmate Converted to Bucket Seats PLEASE CALL before ordering Includes: 2x Cup Holders, 2x Coin Trays (Old Steel Dash Models have 3x Coin Trays), 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots Features: - Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available) - Padded Lid at armrest height with a large carpeted compartment underneath - Black Plastic Cup Holders - 4x Carling Switch Provisions with Blanks - in front of the gearstick - Only uses Factory mounts for Installation (No drilling into the Cab required) – for models with Factory Bucket Seats - Optional Extras (Product Addons Section Below): * Stainless Steel Cup Holders (additional cost - $30.00) * Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00) * Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00) * Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00) * Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00) * Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)Full Length Centre Console
Full Length Centre Console
Full Length Centre Console (DPF Single Cab – OCT 2016 to Current)
Full Length Centre Console
Made to suit VDJ79 Plastic Dash DPF Model Single Cabs (OCT 2016 to Current Models) - INCLUDING THE NEW FACELIFT MODEL
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
Full Length Centre Console (Old Steel Dash HDJ79 RV Single Cab)
Full Length Centre Console
Made to suit OLD STEEL DASH HDJ79 Single Cabs (2002 to 2007 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2001 – 2007 HDJ79 RV with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/Muster Converted to Bucket Seats PLEASE CALL before ordering
** DO NOT FIT IN HZJ75 OR HZJ79 MODELS **
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Full Length Centre Console (Old Steel Dash VDJ79 GXL Single Cab)
Full Length Centre Console
Made to suit OLD STEEL DASH VDJ79 Single Cabs (2007 to 2009 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2007 – 2009 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Full Length Centre Console (Plastic Dash Pre DPF Single Cab – 2009 to OCT 2016)
Full Length Centre Console
Made to suit Plastic Dash Pre-DPF Model 79 Single Cabs (2009 to OCT 2016 Models) – With Factory Bucket Seats
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2009 – OCT 2016 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
• 2014 – OCT 2016 VDJ79 Workmate/GX with Toyota Factory Bucket Seats
Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
GDJ Automatic Bushman Fridge Console
GDJ Automatic Bushman Fridge Console
Made to suit GDJ79 Dual Cabs and Single Cabs – 4 Cylinder Automatics ONLY
(This Console is model specific and not interchangeable – It DOES NOT FIT in the GDJ78 Troop Carriers or GDJ76 Wagons)
PLEASE NOTE that you are required to cut the factory console in half to allow for the new console to be installed – fully detailed Install Instructions are sent out with the console (and will be uploaded to our website soon)
Includes: 2x Cup Holders, Base for Bushman fridge
BUSHMAN 15L ROADIE FRIDGE NOT INCLUDED – CAN BE ADDED BELOW IN PRODUCT ADDONS SECTION
Features:
- Black Vinyl to match the factory console
- A base that secures, levels and sets the fridge at an armrest height whilst clearing the handbrake lever
- The Bushman 15L Roadie Fridge/Freezer is one of the smallest compressor driven fridge/freezers on the market
- Black Plastic Cup Holders
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Bushman 15L Roadie Fridge/Freezer (additional cost - $895.00)
GDJ Automatic Bushman Fridge Console
GDJ Automatic Troop Carrier Centre Console
GDJ Automatic Troop Carrier Centre Console
Made to suit 78 Troop Carriers – 4 Cylinder GDJ Automatics ONLY (This Console is model specific and not interchangeable – It DOES NOT FIT in any other models) This console is an extension and padded armrest for the new Facelift Automatic 78 Troop Carriers. This special designed console is styled to compliment with the rest of the OEM console. The console slides over the factory Automatic console so that you retain all of the factory parts. We have colour matched the console with Black vinyl and stitching. The only modification required is to fasten 4 self tapping screws into the top of the OEM console (under the new console lid). - Optional Extras (Product Addons Section Below): * Rear Sockets - 2x USB-A Ports & 1x 12v Cig Port (additional cost - $50.00) * Rear Sockets – USB-A & USB-C Combo, & 12v Cig Port (additional cost - $70.00)GDJ Automatic Troop Carrier Centre Console
GDJ70 Automatic Half Length Centre Console
GDJ70 Automatic Half Length Centre Console
Made to suit 79 Dual Cabs, 76 Wagons, and DPF 79 Single Cabs – 4 Cylinder GDJ Automatics ONLY (This Console is model specific and not interchangeable – It DOES NOT FIT in any other models) PLEASE NOTE that you are required to cut the factory console in half to allow for the new console to be installed – fully detailed Install Instructions are sent out with the console and can also be found on our website. Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid) Features: - Black Vinyl to match the factory console - Padded Lid at armrest height with a large carpeted compartment underneath - A Removable Plastic Tray underneath the Lid - Black Plastic Cup Holders - Only uses Factory mounts for Installation (No drilling into the Cab required) - Optional Extras (Product Addons Section Below): * Stainless Steel Cup Holders (additional cost - $30.00) * Rear Sockets - 2x USB-A Ports & 1x 12v Cig Port (additional cost - $50.00) * Rear Sockets – USB-A & USB-C Combo, & 12v Cig Port (additional cost - $70.00) * Wiring Harness & Terminals - Exact amount of wiring to connect the Rear Sockets (USB & Cig) to the Auxiliary Box (additional cost - $30.00)GDJ70 Automatic Half Length Centre Console
Gearstick Surround Console (Old Steel Dash HDJ79 & VDJ79 Single Cab)
Gearstick Surround Console
Made to suit Old Steel Dash HDJ79 & VDJ79 Single Cabs – WITH BENCHSEAT (Exact Models Listed Below)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models and WILL NOT FIT the HZJ75 OR HZJ79 Single Cabs, or any Plastic Dash Models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2001 – 2007 HDJ79 Old Steel Dash Workmate or Muster with Factory Benchseat
• 2007 – 2009 VDJ79 Old Steel Dash Workmate or GX with Factory Benchseat
Includes: 1x Cup Holder, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots
Features:
- Black Plastic Cup Holder
- Colour options available – Dark Grey, Black, or Tan with Black Top
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holder (additional cost - $15.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Gearstick Surround Console
GRAB ON Grab Handles (PAIR)
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
GRAB ON GRAB HANDLES
Fit All M6 Bolt-On Grab Handles (not just 70 Series Landcruisers)
Includes: Pair of double layered GRAB ON Grab Handles (JDM washers & bolts included)
Features:
- Reversable colours (Grey & Black)
- Black JDM washers
- Made from 550 Paracord
- Easy to install
- Weight rated to 250KG
- Length: 250mm
Half Length Centre Console (79 Dual Cab & 76 Wagon)
Half Length Centre Console
Made to suit Plastic Dash VDJ79 Dual Cabs, and Both Old Steel Dash and Plastic Dash 76 Wagons – INCLUDING THE NEW FACELIFT MODELS
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Rear Sockets (2x USB Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00)
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00)
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00)
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00)
* Wiring Harness and Terminals - Exact amount of wiring to connect the Rear Sockets (USB & Cig) to the Auxiliary Box (additional cost - $30.00)
Select options
This product has multiple variants. The options may be chosen on the product page