Full Length Centre Console (Old Steel Dash VDJ79 GXL Single Cab)
$1,300.00
Full Length Centre Console
Made to suit OLD STEEL DASH VDJ79 Single Cabs (2007 to 2009 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2007 – 2009 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
– Padded Lid at armrest height with a large carpeted compartment underneath
– A Removable Plastic Tray underneath the Lid
– Black Plastic Cup Holders
– 4x Carling Switch Provisions with Blanks – in front of the gearstick
– Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost – $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost – $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost – $50.00)
* Wiring Harness & Terminals – Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost – $30.00)
Reviews (0)
Shipping & Delivery
Related products
Bulge Shape Roof Console – Full Storage (4 Pockets)
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Bulge Roof Console – Full Storage
Made to suit 79 Dual Cabs, 76 Wagons, Pre DPF 79 Single Cabs, Plastic Dash 78 Troop Carriers, and 75 Series Single Cabs - PLEASE CHOOSE CAREFULLY FROM THE MENU
(This Console is model specific and not interchangeable – It DOES NOT FIT in DPF Model 79 Single Cabs with Side Curtain Airbags, or Pre-2007 Old Steel Dash Troop Carriers)
Includes: Pair of front LED touch lights, 4x netted and carpet lined storage pockets, Recesses for the sun visors to sit flush
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the LED touch lights (additional cost - $30.00)
* GME XRS-330C Connect UHF (additional cost - $530.00)
- The power unit will need to be installed under the vehicle dashboard
* GME Magnetic Microphone Mount (additional cost - $39.00)
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
* USB-A & USB-C Sockets Inside Console - in angled fascia/s (additional costs vary)
* Genuine Grab Handle (additional cost - $49.50)
Cruiser Consoles Seat Covers
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab
CRUISER CONSOLES RAZORBACK SEAT COVERS
Made to suit 79 Dual Cabs (including the new Facelift models), DPF Model 79 Single Cabs (including the new Facelift models), and Pre-DPF 79 Single Cabs (1999 – 2016) - Razorback Seat Covers - Premium Neoprene with Black Stitching - Stitched Cruiser Consoles logo - Front & Rear Seat Covers Available – Select from the Menu
Full Length Centre Console – with Quadlock Magnetic Pivot Head Phone Charger
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Full Length Centre Console – with Quadlock Magnetic Pivot Head Phone Charger
Made to suit 79 Dual Cabs, 76 Wagons, 79 Single Cabs (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash), and 78 Troop Carriers (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Troop Carriers – Please note you will loose full movement of your passenger seat being able to go all of the way forward, as the seat hits on the gearstick surround section of the console.
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING – IF YOU HAVE AN OLDER MODEL WORKMATE/GX THAT HAS BEEN CONVERTED TO BUCKET SEATS PLEASE CALL BEFORE PURCHASING
Includes: 2x Cup Holders, 1x Coin Tray (Old Steel Dash Models have 2x Coin Trays), 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid - except for Troopy's), Quadlock Phone Charger (including Base, MAG Head Wireless Charger, Single Pivot Arm, and hidden USB for power) – WILL ONLY SUIT A QUADLOCK MAG CASE
Features:
- Has been tested in our display Landcruisers for the last 12 months
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks – in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Rear Sockets (2x USB-A Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00) - Dual Cabs/Wagons Only
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00) - Dual Cabs/Wagons Only
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00) - Dual Cabs/Wagons/Troopys Only
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00) - Dual Cabs/Wagons/Troopys Only
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
Half Length Centre Console (Old Steel Dash Single Cab)
Half Length Centre Console
Made to suit Old Steel Dash Model Single Cabs (Exact Models Listed Below)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models and WILL NOT FIT the 1999 – 2007 HZJ79 Single Cabs)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 1985 – 1999 HZJ75 Series Old Steel Dash
If you have the above year model Converted to Bucket Seats PLEASE CALL before ordering
• 2001 – 2007 HDJ79 Old Steel Dash RV with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/Muster Converted to Bucket Seats PLEASE CALL before ordering
• 2007 – 2009 VDJ79 Old Steel Dash GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
MSA Electric Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Electric Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Electric Towing Mirrors (includes Electric Kit, Large Base, Indicators and Switch Kit) – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
- In OLD STEEL DASH Models the adjustment switch is mounted sideways in the dash – Instructions/Install video available on how to re-wire (via email) – PLEASE SELECT THIS VEHICLE MODEL IF APPLICABLE SO THAT WE CAN SEND YOU THE VIDEO INSTRUCTIONS
MSA Manual Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Manual Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Manual Towing Mirrors – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
MSA Power Fold Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Power Fold Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Power Fold Towing Mirrors (includes Electric Kit, Large Base, Indicators, Power Fold and Switch Kit) – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
- In OLD STEEL DASH Models the adjustment switch is mounted sideways in the dash – Instructions/Install video available on how to re-wire (via email) – PLEASE SELECT THIS VEHICLE MODEL IF APPLICABLE SO THAT WE CAN SEND YOU THE VIDEO INSTRUCTIONS
Reviews
There are no reviews yet.