Bulge Shape Roof Console – Full Storage (4 Pockets)
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Bulge Roof Console – Full Storage
Made to suit 79 Dual Cabs, 76 Wagons, Pre DPF 79 Single Cabs, Plastic Dash 78 Troop Carriers, and 75 Series Single Cabs - PLEASE CHOOSE CAREFULLY FROM THE MENU
(This Console is model specific and not interchangeable – It DOES NOT FIT in DPF Model 79 Single Cabs with Side Curtain Airbags, or Pre-2007 Old Steel Dash Troop Carriers)
Includes: Pair of front LED touch lights, 4x netted and carpet lined storage pockets, Recesses for the sun visors to sit flush
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the LED touch lights (additional cost - $30.00)
* GME XRS-330C Connect UHF (additional cost - $530.00)
- The power unit will need to be installed under the vehicle dashboard
* GME Magnetic Microphone Mount (additional cost - $39.00)
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
* USB-A & USB-C Sockets Inside Console - in angled fascia/s (additional costs vary)
* Genuine Grab Handle (additional cost - $49.50)
Select options
This product has multiple variants. The options may be chosen on the product page
Bulge Shape Roof Console – With DIN Sized UHF Provision
Bulge Roof Console – DIN Sized UHF Provision
Made to suit 79 Dual Cabs, 76 Wagons, Pre DPF 79 Single Cabs, Plastic Dash 78 Troop Carriers, and 75 Series Single Cabs - PLEASE CHOOSE CAREFULLY FROM THE MENU
(This Console is model specific and not interchangeable – It DOES NOT FIT in DPF Model 79 Single Cabs with Side Curtain Airbags, or Pre-2007 Old Steel Dash Troop Carriers)
Includes: Pair of front LED touch lights, 1x Slot for a DIN Sized UHF, 3x netted and carpet lined storage pockets, Recesses for the sun visors to sit flush
UHF NOT INCLUDED
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the LED touch lights (additional cost - $30.00)
* GME TX4500S UHF (additional cost - $520.00)
- The unit will be installed free of charge to the console before dispatch
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
* USB-A & USB-C Sockets Inside Console - in angled fascia/s (additional costs vary)
* Genuine Grab Handle (additional cost - $49.50)
Select options
This product has multiple variants. The options may be chosen on the product page
Cruiser Consoles Seat Covers
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab
CRUISER CONSOLES RAZORBACK SEAT COVERS
Made to suit 79 Dual Cabs (including the new Facelift models), DPF Model 79 Single Cabs (including the new Facelift models), and Pre-DPF 79 Single Cabs (1999 – 2016) - Razorback Seat Covers - Premium Neoprene with Black Stitching - Stitched Cruiser Consoles logo - Front & Rear Seat Covers Available – Select from the Menu
Select options
This product has multiple variants. The options may be chosen on the product page
Front Speaker Pods (1x PAIR) – Does NOT Include Speakers
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Front Speaker Pods
Made to suit All 70 Series Landcruisers
(Please note the Single Cab doors are slightly longer at the bottom however the pods do still fit)Includes: 1x Pair of Front Speaker Pods (for Front Doors) - WITHOUT MAP POCKETS (Map Pockets are a "Product Add-On" Below)
SPEAKERS NOT INCLUDED - Rockford & Kicker Speakers Available in Product Addons Section belowFeatures:
- Option of 6.5” Round or 6x9” Oval Speaker cut outs, with minimal door frame cutting required for speakers with large magnets
- Fitting Instructions and Mounting Hardware are supplied for DIY Install, or have your local Car Audio Store install them for youMap Pockets – Optional Extras (Product Addons Section Below):
To create the bottle holder with our Front Speaker Pods you require 2x Flat map pockets (which attach onto the front of the speaker pods). If you don’t have these please see below to know which you need to order:
Pair Map Pockets
• If you have Manual Windup Windows
• If you have no map pockets at all (normally all Workmates/GX’s, and majority of the Old Steel Dash models)
1x Map Pocket
• Any late 2020 – Current model GXL’s that came factory with a built-in bottle holder map pocket on the Passenger door (as these don’t attach to our speaker pods)
Pillar Pods – with Tweeter Housing (Product Addons Section Below):
To Suit VDJ79 Dual Cabs, VDJ76 Wagons, and VDJ79 Single Cabs (Pre-DPF Plastic Dash Models Only)
Includes: 1x Pair of Left and Right A-Pillar Trims - Grey
• Made from injection moulded UV stable ASA plastic
• Comes with 2x tweeter cutout guides
• Fits most tweeters
• Flush mount
TWEETERS NOT INCLUDED
Wiring Harness (Product Addons Section Below):
* Enough wire and terminals to connect the Speakers to the Head Unit and Factory Speaker Harness (additional cost - $50.00)Our popular Speaker Pods not only look great but are very functional. These new pods are injection moulded plastic with a solid backing plate all made right here in Australia. They fit all 70 Series Landcruisers. The Speaker Pod moves the factory pocket back in the GXL models to provide room for the speaker. They provide a spacer and a solid fixing mount for the speakers and turn the factory map pocket/s into a standard size 600mm bottle holder, while still leaving room for A4 size magazines etc behind the stored bottle.
Select options
This product has multiple variants. The options may be chosen on the product page
Full Length Centre Console – with Quadlock Magnetic Pivot Head Phone Charger
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Full Length Centre Console – with Quadlock Magnetic Pivot Head Phone Charger
Made to suit 79 Dual Cabs, 76 Wagons, 79 Single Cabs (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash), and 78 Troop Carriers (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Troop Carriers – Please note you will loose full movement of your passenger seat being able to go all of the way forward, as the seat hits on the gearstick surround section of the console.
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING – IF YOU HAVE AN OLDER MODEL WORKMATE/GX THAT HAS BEEN CONVERTED TO BUCKET SEATS PLEASE CALL BEFORE PURCHASING
Includes: 2x Cup Holders, 1x Coin Tray (Old Steel Dash Models have 2x Coin Trays), 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid - except for Troopy's), Quadlock Phone Charger (including Base, MAG Head Wireless Charger, Single Pivot Arm, and hidden USB for power) – WILL ONLY SUIT A QUADLOCK MAG CASE
Features:
- Has been tested in our display Landcruisers for the last 12 months
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks – in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Rear Sockets (2x USB-A Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00) - Dual Cabs/Wagons Only
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00) - Dual Cabs/Wagons Only
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00) - Dual Cabs/Wagons/Troopys Only
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00) - Dual Cabs/Wagons/Troopys Only
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
Select options
This product has multiple variants. The options may be chosen on the product page
Full Length Centre Console – with Universal Wireless Phone Charger
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
Full Length Centre Console – with Universal Wireless Phone Charger
Made to suit 79 Dual Cabs, 76 Wagons, 79 Single Cabs (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash), and 78 Troop Carriers (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Troop Carriers – Please note you will loose full movement of your passenger seat being able to go all of the way forward, as the seat hits on the gearstick surround section of the console.
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING – IF YOU HAVE AN OLDER MODEL WORKMATE/GX THAT HAS BEEN CONVERTED TO BUCKET SEATS PLEASE CALL BEFORE PURCHASING
Includes: 2x Cup Holders, 1x Coin Tray (Old Steel Dash Models have 2x Coin Trays), 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid - except for Troopy's), Quadlock Flat MAG Wireless Charging Pad (including Cruiser Consoles Charger Surround, and hidden USB for power) – WILL SUIT MOST PHONE CASES (CHARGING PAD & SURROUND IS 170MM X 90MM)
Features:
- Has been tested in our display Landcruisers for the last 12 months
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks – in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Rear Sockets (2x USB-A Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00) - Dual Cabs/Wagons Only
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00) - Dual Cabs/Wagons Only
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00) - Dual Cabs/Wagons/Troopys Only
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00) - Dual Cabs/Wagons/Troopys Only
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
WE OFFER INSTALLATION OF ALL OF OUR PRODUCTS – PLEASE CONTACT US FOR PRICING
Select options
This product has multiple variants. The options may be chosen on the product page
Full Length Centre Console (Plastic Dash Pre DPF Single Cab – 2009 to OCT 2016)
Full Length Centre Console
Made to suit Plastic Dash Pre-DPF Model 79 Single Cabs (2009 to OCT 2016 Models) – With Factory Bucket Seats
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2009 – OCT 2016 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
• 2014 – OCT 2016 VDJ79 Workmate/GX with Toyota Factory Bucket Seats
Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
GRAB ON Grab Handles (PAIR)
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
GRAB ON GRAB HANDLES
Fit All M6 Bolt-On Grab Handles (not just 70 Series Landcruisers)
Includes: Pair of double layered GRAB ON Grab Handles (JDM washers & bolts included)
Features:
- Reversable colours (Grey & Black)
- Black JDM washers
- Made from 550 Paracord
- Easy to install
- Weight rated to 250KG
- Length: 250mm
Half Length Centre Console (Pre DPF Single Cab)
Half Length Centre Console
Made to suit Plastic Dash Pre-DPF Model 79 Single Cabs (2009 to OCT 2016 Models) – With Factory Bucket Seats
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2009 – OCT 2016 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
• 2014 – OCT 2016 VDJ79 Workmate/GX with Toyota Factory Bucket Seats
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
MSA Electric Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Electric Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Electric Towing Mirrors (includes Electric Kit, Large Base, Indicators and Switch Kit) – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
- In OLD STEEL DASH Models the adjustment switch is mounted sideways in the dash – Instructions/Install video available on how to re-wire (via email) – PLEASE SELECT THIS VEHICLE MODEL IF APPLICABLE SO THAT WE CAN SEND YOU THE VIDEO INSTRUCTIONS
Select options
This product has multiple variants. The options may be chosen on the product page
MSA Manual Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Manual Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Manual Towing Mirrors – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
Select options
This product has multiple variants. The options may be chosen on the product page
MSA Power Fold Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Power Fold Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Power Fold Towing Mirrors (includes Electric Kit, Large Base, Indicators, Power Fold and Switch Kit) – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
- In OLD STEEL DASH Models the adjustment switch is mounted sideways in the dash – Instructions/Install video available on how to re-wire (via email) – PLEASE SELECT THIS VEHICLE MODEL IF APPLICABLE SO THAT WE CAN SEND YOU THE VIDEO INSTRUCTIONS
Select options
This product has multiple variants. The options may be chosen on the product page