| Size |
6.5" Round ,6×9" Oval |
|---|---|
| Colour |
Black ,Grey ,Tan/Beige |
Front Speaker Pods (1x PAIR) – Does NOT Include Speakers
$300.00
Front Speaker Pods
Made to suit All 70 Series Landcruisers
(Please note the Single Cab doors are slightly longer at the bottom however the pods do still fit)Includes: 1x Pair of Front Speaker Pods (for Front Doors) – WITHOUT MAP POCKETS (Map Pockets are a “Product Add-On” Below)
SPEAKERS NOT INCLUDED – Rockford & Kicker Speakers Available in Product Addons Section belowFeatures:
– Option of 6.5” Round or 6×9” Oval Speaker cut outs, with minimal door frame cutting required for speakers with large magnets
– Fitting Instructions and Mounting Hardware are supplied for DIY Install, or have your local Car Audio Store install them for youMap Pockets – Optional Extras (Product Addons Section Below):
To create the bottle holder with our Front Speaker Pods you require 2x Flat map pockets (which attach onto the front of the speaker pods). If you don’t have these please see below to know which you need to order:
Pair Map Pockets
• If you have Manual Windup Windows
• If you have no map pockets at all (normally all Workmates/GX’s, and majority of the Old Steel Dash models)
1x Map Pocket
• Any late 2020 – Current model GXL’s that came factory with a built-in bottle holder map pocket on the Passenger door (as these don’t attach to our speaker pods)
(Please note the Single Cab doors are slightly longer at the bottom however the pods do still fit)Includes: 1x Pair of Front Speaker Pods (for Front Doors) – WITHOUT MAP POCKETS (Map Pockets are a “Product Add-On” Below)
SPEAKERS NOT INCLUDED – Rockford & Kicker Speakers Available in Product Addons Section belowFeatures:
– Option of 6.5” Round or 6×9” Oval Speaker cut outs, with minimal door frame cutting required for speakers with large magnets
– Fitting Instructions and Mounting Hardware are supplied for DIY Install, or have your local Car Audio Store install them for youMap Pockets – Optional Extras (Product Addons Section Below):
To create the bottle holder with our Front Speaker Pods you require 2x Flat map pockets (which attach onto the front of the speaker pods). If you don’t have these please see below to know which you need to order:
Pair Map Pockets
• If you have Manual Windup Windows
• If you have no map pockets at all (normally all Workmates/GX’s, and majority of the Old Steel Dash models)
1x Map Pocket
• Any late 2020 – Current model GXL’s that came factory with a built-in bottle holder map pocket on the Passenger door (as these don’t attach to our speaker pods)
Pillar Pods – with Tweeter Housing (Product Addons Section Below):
To Suit VDJ79 Dual Cabs, VDJ76 Wagons, and VDJ79 Single Cabs (Pre-DPF Plastic Dash Models Only)
Includes: 1x Pair of Left and Right A-Pillar Trims – Grey
• Made from injection moulded UV stable ASA plastic
• Comes with 2x tweeter cutout guides
• Fits most tweeters
• Flush mount
TWEETERS NOT INCLUDED
To Suit VDJ79 Dual Cabs, VDJ76 Wagons, and VDJ79 Single Cabs (Pre-DPF Plastic Dash Models Only)
Includes: 1x Pair of Left and Right A-Pillar Trims – Grey
• Made from injection moulded UV stable ASA plastic
• Comes with 2x tweeter cutout guides
• Fits most tweeters
• Flush mount
TWEETERS NOT INCLUDED
Wiring Harness (Product Addons Section Below):
* Enough wire and terminals to connect the Speakers to the Head Unit and Factory Speaker Harness (additional cost – $50.00)Our popular Speaker Pods not only look great but are very functional. These new pods are injection moulded plastic with a solid backing plate all made right here in Australia. They fit all 70 Series Landcruisers. The Speaker Pod moves the factory pocket back in the GXL models to provide room for the speaker. They provide a spacer and a solid fixing mount for the speakers and turn the factory map pocket/s into a standard size 600mm bottle holder, while still leaving room for A4 size magazines etc behind the stored bottle.
* Enough wire and terminals to connect the Speakers to the Head Unit and Factory Speaker Harness (additional cost – $50.00)Our popular Speaker Pods not only look great but are very functional. These new pods are injection moulded plastic with a solid backing plate all made right here in Australia. They fit all 70 Series Landcruisers. The Speaker Pod moves the factory pocket back in the GXL models to provide room for the speaker. They provide a spacer and a solid fixing mount for the speakers and turn the factory map pocket/s into a standard size 600mm bottle holder, while still leaving room for A4 size magazines etc behind the stored bottle.
Additional information
Reviews (0)
Shipping & Delivery
Related products
Centre Roof Console – Flat Bottom
Flat Centre Roof Console
Made to suit DPF Model (OCT 2016 to Current) 79 Single Cabs with Side Curtain Airbags ONLY
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: Pair of front LED touch lights, A4 sized netted and carpet lined storage pocket, Rear LED light (with full wiring for the on/off switch using the factory wiring functions)
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the front LED touch lights (additional cost - $15.00)
* GME XRS-330C Connect UHF (additional cost - $530.00)
- The power unit will need to be installed under the vehicle dashboard
* GME Magnetic Microphone Mount (additional cost - $39.00)
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
Centre Roof Console – With DIN Sized UHF Provision
Centre Roof Console – DIN Sized UHF Provision
Made to suit DPF Model (OCT 2016 to Current) 79 Single Cabs with Side Curtain Airbags ONLY
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: Pair of front LED touch lights, 1x Slot for a DIN Sized UHF, A4 sized netted and carpet lined storage pocket, Rear LED light (with full wiring for the on/off switch using the factory wiring functions)
UHF NOT INCLUDED
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the LED touch lights (additional cost - $30.00)
* GME TX4500S UHF (additional cost - $520.00)
- The unit will be installed free of charge to the console before dispatch
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
Full Length Centre Console (Old Steel Dash HDJ79 RV Single Cab)
Full Length Centre Console
Made to suit OLD STEEL DASH HDJ79 Single Cabs (2002 to 2007 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2001 – 2007 HDJ79 RV with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/Muster Converted to Bucket Seats PLEASE CALL before ordering
** DO NOT FIT IN HZJ75 OR HZJ79 MODELS **
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Full Length Centre Console (Old Steel Dash VDJ79 GXL Single Cab)
Full Length Centre Console
Made to suit OLD STEEL DASH VDJ79 Single Cabs (2007 to 2009 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2007 – 2009 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
GRAB ON Grab Handles (PAIR)
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
GRAB ON GRAB HANDLES
Fit All M6 Bolt-On Grab Handles (not just 70 Series Landcruisers)
Includes: Pair of double layered GRAB ON Grab Handles (JDM washers & bolts included)
Features:
- Reversable colours (Grey & Black)
- Black JDM washers
- Made from 550 Paracord
- Easy to install
- Weight rated to 250KG
- Length: 250mm
Half Length Centre Console (79 Dual Cab & 76 Wagon)
Half Length Centre Console
Made to suit Plastic Dash VDJ79 Dual Cabs, and Both Old Steel Dash and Plastic Dash 76 Wagons – INCLUDING THE NEW FACELIFT MODELS
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Rear Sockets (2x USB Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost - $120.00)
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost - $140.00)
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost - $50.00)
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost - $70.00)
* Wiring Harness and Terminals - Exact amount of wiring to connect the Rear Sockets (USB & Cig) to the Auxiliary Box (additional cost - $30.00)
Half Length Centre Console (Pre DPF Single Cab)
Half Length Centre Console
Made to suit Plastic Dash Pre-DPF Model 79 Single Cabs (2009 to OCT 2016 Models) – With Factory Bucket Seats
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2009 – OCT 2016 VDJ79 GXL with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/GX Converted to Bucket Seats PLEASE CALL before ordering
• 2014 – OCT 2016 VDJ79 Workmate/GX with Toyota Factory Bucket Seats
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
MSA Electric Towing Mirrors
79 Dual Cab and 76 Wagon, DPF 79 Single Cab, Facelift GDJ70 Automatics, Old Steel Dash Single Cab, Pre DPF 79 Single Cab, Troop Carrier
MSA Electric Towing Mirrors
Fit ALL 70 Series Landcruisers (75, 76, 78 & 79 Series)
Includes: Pair of MSA Electric Towing Mirrors (includes Electric Kit, Large Base, Indicators and Switch Kit) – Available in CHROME or BLACK
Features:
- Large single mirror that pivots on a heavy-duty extension slide, allowing the mirror to extend out when towing and return to a normal driving position when not towing
- 4x different mirror positions, and adjustable viewing angles – includes vertical and horizontal
- In OLD STEEL DASH Models the adjustment switch is mounted sideways in the dash – Instructions/Install video available on how to re-wire (via email) – PLEASE SELECT THIS VEHICLE MODEL IF APPLICABLE SO THAT WE CAN SEND YOU THE VIDEO INSTRUCTIONS
Reviews
There are no reviews yet.