| Vehicle Model |
79 DPF Single Cab (Late 2016-2023 Pre-Facelift) ,79 Dual Cab or 76 Wagon (Pre-Facelift) ,79 Dual Cab or 76 Wagon (Pre-Facelift} ,HDJ78 Troop Carrier Old Steel Dash (2002-2007) – Converted to Bucket Seats ,HDJ78 Troop Carrier Old Steel Dash (2002-2007) – with Factory Bucket Seats ,HDJ79 Single Cab Old Steel Dash (2002-2007) – ckout. Converted to Bucket Seats ,HDJ79 Single Cab Old Steel Dash (2002-2007) – with Factory Bucket Seats ,Late 2023-24 Facelift VDJ 78 Troop Carrier ,Late 2023-24 Facelift VDJ 79 Dual Cab or 76 Wagon ,Late 2023-24 Facelift VDJ 79 Single Cab ,OCT 2016 – Current DPF 79 Single Cab ,Old Steel Dash 76 Wagon (2007-2009} ,Plastic Dash 79 Dual Cab and 76 Wagon ,VDJ78 Troop Carrier Old Steel Dash (2007-2009) – Converted to Bucket Seats ,VDJ78 Troop Carrier Old Steel Dash (2007-2009) – with Factory Bucket Seats ,VDJ78 Troop Carrier Plastic Dash (Pre-Facelift) Converted to Bucket Seats ,VDJ78 Troop Carrier Plastic Dash (Pre-Facelift) with Factory Bucket Seats ,VDJ79 Pre-DPF Single Cab Plastic Dash (2009-2016) – Converted to Bucket Seats ,VDJ79 Pre-DPF Single Cab Plastic Dash (2009-2016) – with Factory Bucket Seats ,VDJ79 Single Cab Old Steel Dash (2007-2009) – with Factory Bucket Seats |
|---|---|
| Vinyl Colour |
Black Vinyl ,Dark Grey Vinyl ,Tan/Beige Vinyl |
Full Length Centre Console – with Universal Wireless Phone Charger
$1,600.00
Full Length Centre Console – with Universal Wireless Phone Charger
Made to suit 79 Dual Cabs, 76 Wagons, 79 Single Cabs (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash), and 78 Troop Carriers (VDJ Plastic & Old Steel Dash and HDJ Old Steel Dash)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Troop Carriers – Please note you will loose full movement of your passenger seat being able to go all of the way forward, as the seat hits on the gearstick surround section of the console.
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING – IF YOU HAVE AN OLDER MODEL WORKMATE/GX THAT HAS BEEN CONVERTED TO BUCKET SEATS PLEASE CALL BEFORE PURCHASING
Includes: 2x Cup Holders, 1x Coin Tray (Old Steel Dash Models have 2x Coin Trays), 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid – except for Troopy’s), Quadlock Flat MAG Wireless Charging Pad (including Cruiser Consoles Charger Surround, and hidden USB for power) – WILL SUIT MOST PHONE CASES (CHARGING PAD & SURROUND IS 170MM X 90MM)
Features:
– Has been tested in our display Landcruisers for the last 12 months
– Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
– Padded Lid at armrest height with a large carpeted compartment underneath
– A Removable Plastic Tray underneath the Lid
– Black Plastic Cup Holders
– 4x Carling Switch Provisions with Blanks – in front of the gearstick
– Only uses Factory mounts for Installation (No drilling into the Cab required)
– Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost – $30.00)
* Rear Sockets (2x USB-A Ports & 1x 12v Cig Port) and Slide Out Cup Holders (additional cost – $120.00) – Dual Cabs/Wagons Only
* Rear Sockets (USB-A & USB-C Combo, & 12v Cig Port) and Slide Out Cup Holders (additional cost – $140.00) – Dual Cabs/Wagons Only
* Rear USB-A Sockets & 12v Cig Port ONLY (additional cost – $50.00) – Dual Cabs/Wagons/Troopys Only
* Rear USB-A & USB-C Sockets, & 12v Cig Port ONLY (additional cost – $70.00) – Dual Cabs/Wagons/Troopys Only
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost – $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost – $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Rear Sockets (USB & Cig) AND/OR Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost – $30.00)
WE OFFER INSTALLATION OF ALL OF OUR PRODUCTS – PLEASE CONTACT US FOR PRICING
Additional information
Reviews (0)
Shipping & Delivery
Related products
Centre Roof Console – Flat Bottom
Flat Centre Roof Console
Made to suit DPF Model (OCT 2016 to Current) 79 Single Cabs with Side Curtain Airbags ONLY
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: Pair of front LED touch lights, A4 sized netted and carpet lined storage pocket, Rear LED light (with full wiring for the on/off switch using the factory wiring functions)
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the front LED touch lights (additional cost - $15.00)
* GME XRS-330C Connect UHF (additional cost - $530.00)
- The power unit will need to be installed under the vehicle dashboard
* GME Magnetic Microphone Mount (additional cost - $39.00)
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
Centre Roof Console – With DIN Sized UHF Provision
Centre Roof Console – DIN Sized UHF Provision
Made to suit DPF Model (OCT 2016 to Current) 79 Single Cabs with Side Curtain Airbags ONLY
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: Pair of front LED touch lights, 1x Slot for a DIN Sized UHF, A4 sized netted and carpet lined storage pocket, Rear LED light (with full wiring for the on/off switch using the factory wiring functions)
UHF NOT INCLUDED
- Light Grey Vinyl to match the colour of your roof lining (Other Colour Options are available)
Optional Extras (Product Addons Section Below):
* Wiring Harness and Terminals – Exact amount of wiring to connect the LED touch lights (additional cost - $30.00)
* GME TX4500S UHF (additional cost - $520.00)
- The unit will be installed free of charge to the console before dispatch
* GME Antenna of your choice (additional costs vary)
* GME Fold Down Antenna Mount (additional cost - $110.00)
Fridge Console to suit BUSHMAN 15L Roadie
Bushman Fridge Console
Made to suit Plastic Dash 79 Dual Cabs, 76 Wagons (Pre-Facelift ONLY), and DPF Model 79 Single Cabs (OCT 2016 to Current)
** PLEASE NOTE OUR BUSHMAN FRIDGE CONSOLE WILL FIT IN THE BRAND NEW 2024 8 CYLINDER MODELS (EXCEPT THE 76 WAGONS). WE ARE CURRENTLY WORKING ON A CONSOLE TO FIT IN THE NEW 4 CYLINDER AUTOS & V8 76 WAGONS **
(This Console is model specific and not interchangeable – It DOES NOT FIT in any 78 Troop Carriers, or Pre-DPF 79 Single Cabs)
Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Base for Bushman fridge
BUSHMAN 15L ROADIE FRIDGE NOT INCLUDED – CAN BE ADDED BELOW IN PRODUCT ADDONS SECTION
Features:
- A base that secures, levels and sets the fridge at an armrest height whilst clearing the handbrake lever
- The Bushman 15L Roadie Fridge/Freezer is one of the smallest compressor driven fridge/freezers on the market
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Bushman 15L Roadie Fridge/Freezer (additional cost - $895.00)
Front Non-Locking Underseat Storage Drawer – 1x ONLY (79 Dual Cab and 76 Wagon)
Front Non-Locking Underseat Storage Drawer (1x ONLY)
Made to suit Plastic Dash 79 Dual Cabs, and Both Old Steel Dash and Plastic Dash 76 Wagons
(These Storage Drawers DO NOT FIT in any other models, and WILL NOT FIT with Recaro seats)
In some of the newer models you will need to bend the seat slide adjuster away from the drawer slightly to allow the drawer to slide open.
Includes: 1x Underseat Non-Locking Storage Drawer (for Front Seats Only), Mounting Brackets (fit between the Factory seat slides and seat frames)
Features:
- Internal Dimensions: 390mm L x 140mm W x 90mm H
- Easy to Install, no modifications required – minimal tools required: 12mm and 14mm sockets
- Comes with Fitting Instructions, Hardware and Allan Key
- The drawer is non-locking
- Robust 45KG rated fully extendable ball bearing slides
- Reversible mounting brackets, so the drawer will fit either Drivers or Passenger seat
- The drawer moves with the seat so it’s never in the way
- PRODUCT ADDONS BELOW:
* You MUST SELECT whether you have Genuine Toyota Bucket Seats, or Aftermarket Bucket Seats when placing your order so that we can send out the correct mounting brackets (no additional fee)
Full Length Centre Console (DPF Single Cab – OCT 2016 to Current)
Full Length Centre Console
Made to suit VDJ79 Plastic Dash DPF Model Single Cabs (OCT 2016 to Current Models) - INCLUDING THE NEW FACELIFT MODEL
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: 2x Cup Holders, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals – Exact amount of wiring to connect the Front USB Socket in new FACELIFT Models to the Auxiliary Box (additional cost - $30.00)
Full Length Centre Console (Old Steel Dash HDJ79 RV Single Cab)
Full Length Centre Console
Made to suit OLD STEEL DASH HDJ79 Single Cabs (2002 to 2007 Models)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2001 – 2007 HDJ79 RV with Toyota Factory Bucket Seats
If you have the above year model but in a Workmate/Muster Converted to Bucket Seats PLEASE CALL before ordering
** DO NOT FIT IN HZJ75 OR HZJ79 MODELS **
Includes: 2x Cup Holders, 3x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots, Removable Plastic Tray (under console lid)
Features:
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- 4x Carling Switch Provisions with Blanks - in front of the gearstick
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Gearstick Surround Console (Old Steel Dash HDJ79 & VDJ79 Single Cab)
Gearstick Surround Console
Made to suit Old Steel Dash HDJ79 & VDJ79 Single Cabs – WITH BENCHSEAT (Exact Models Listed Below)
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models and WILL NOT FIT the HZJ75 OR HZJ79 Single Cabs, or any Plastic Dash Models)
PLEASE ENSURE YOU HAVE THE CORRECT MODEL BEFORE PURCHASING:
• 2001 – 2007 HDJ79 Old Steel Dash Workmate or Muster with Factory Benchseat
• 2007 – 2009 VDJ79 Old Steel Dash Workmate or GX with Factory Benchseat
Includes: 1x Cup Holder, 2x Coin Trays, 2x USB-A Ports, 4x Carling Switch Provisions with Blanks, 2x Gearstick Boots
Features:
- Black Plastic Cup Holder
- Colour options available – Dark Grey, Black, or Tan with Black Top
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holder (additional cost - $15.00)
* Front Sockets – Substitute Front Double USB-A Sockets for a USB-A & USB-C Combo (additional cost - $20.00)
* Front Sockets – Additional Front USB-A & USB-C Combo (additional cost - $50.00)
* Wiring Harness & Terminals - Enough wiring to connect the Front USB Socket to the Auxiliary Box (additional cost - $30.00)
Gearstick Surround Console
Half Length Centre Console (DPF Single Cab)
Half Length Centre Console
Made to suit VDJ79 Plastic Dash DPF Model Single Cabs (OCT 2016 to Current Models) - INCLUDING THE NEW FACELIFT MODEL
(This Console is model specific and not interchangeable – It DOES NOT FIT in any other models)
Includes: 2x Cup Holders, 1x Coin Tray, Removable Plastic Tray (under console lid)
Features:
- Dark Grey Vinyl to match the colour of your dash (Other Colour Options are available)
- Padded Lid at armrest height with a large carpeted compartment underneath
- A Removable Plastic Tray underneath the Lid
- Black Plastic Cup Holders
- Only uses Factory mounts for Installation (No drilling into the Cab required)
- Optional Extras (Product Addons Section Below):
* Stainless Steel Cup Holders (additional cost - $30.00)
Reviews
There are no reviews yet.